4 Steps To a Clean Epoxy Floor

Concrete floors alone can crack and weaken overtime, unless protected. epoxy flooring offer superior protection for slabs, but many people inadvertently damage the epoxy with abrasive cleaners and stiff brushes. While epoxy, like any floor, requires maintenance, there is a process you should stick to to ensure the longevity of the product.

1. Sweep

Before applying any cleaner to the surface of the floor, you should remove any debris. you should pick up larger items, so you do not scratch the surface by dragging them with a broom. you want to remove as much dirt and debris as possible before moving onto the next step.

2. Rinse

The epoxy flooring must be rinsed to achieve the best finish with a degreaser. After sweeping the floor, you want to use a mop and water to rinse the surface. you can use a hose but make sure the setting is not too strong. allow the surface time to dry before spraying it down one more time for good measure.

3. Use Coldwater Degreaser

With the surface as clean as you can get it without chemicals, apply a cold water degreaser. You will want to use a generous amount and push around the entire surface with a soft bristle brush. follow the instructions for the degreaser you are using.

4. Rinse and Repeat

After the degreaser has been sitting for the recommended time, you can once again rinse the floor. You want to go slowly, ensuring that you spray down every corner. once the area is thoroughly rinsed, you can reapply the degreaser and scrub the floor again, finishing with one last rinse.

Epoxy flooring is a durable flooring that will protect your concrete. However to get the most out of the product, you need to maintain it and clean it correctly. Following the instructions above should allow you floor to last and keep the surface pristine.